Saru degasser D-19
Product: Saru degasser D-19 is exceptional strong degasser for Aluminum and Aluminum alloys.
Function:
- To remove hydrogen from the molten metal
- To minimize blow hole porosity
- To minimize open hole porosity
- To minimize microporosity
- To enhance surface finish of the casting surface
Application
Saru degasser D-20 are generally used as the application rate of 0.15 to 0.20% by weight of molten metal for Aluminum and Aluminum alloys.
Packing:
- Available in 50 grams, 250 grams and 500 grams tablet sizes.
Precaution:
This product should be stored in cool and dry place and unpack as per requirement.
Saru degasser cum grain-refiner D-20
Product: Saru degasser D-20 is Degasser-cum grain-refiner for Aluminum and Aluminum alloys.
Function:
- To remove hydrogen from the molten metal
- To refine the grain size of the aluminum and aluminum alloys
- To minimize blow hole porosity
- To minimize open hole porosity
- To minimize microporosity
- To enhance surface finish of the casting surface
Application
ASaru degasser D-20 are generally used as the application rate of 0.15 to 0.20% by weight of molten metal for Aluminum and Aluminum alloys
Packing:
- Available in 50 grams, 250 grams and 500 grams tablet sizes.
Precaution:
This product should be stored in cool and dry place and unpack as per requirement.
Saru degasser D-50
Product: Saru degasser D-50 is super strong degasser for Aluminum and Aluminum alloys.
Function:
- To remove hydrogen from the molten metal
- To minimize blow hole porosity
- To minimize open hole porosity
- To minimize microporosity
- To enhance surface finish of the casting surface
Application
Saru degasser D-50 are generally used as the application rate of 0.15 to 0.20% by weight of molten metal for Aluminum and Aluminum alloys.
Packing:
- Available in 50 grams, 250 grams and 500 grams tablet sizes.
Precaution:
This product should be stored in cool and dry place and unpack as per requirement.
Saru degasser D-108 N
Product: Saru degasser D-108 N is nitrogen-based degasser for Aluminum and Aluminum alloys.
Function:
- To remove hydrogen from the molten metal
- To minimize blow hole porosity
- To minimize open hole porosity
- To minimize microporosity
- To enhance surface finish of the casting surface
Application
Saru degasser D-108 N are generally used as the application rate of 0.10 to 0.20% by weight of molten metal for Aluminum and Aluminum alloys.
Packing:
- Available in 50 grams, 250 grams and 500 grams tablet sizes.
Precaution:
This product should be stored in cool and dry place and unpack as per requirement.
